What’s New in Swift 4

API Changes

Before jumping right into additions introduced in Swift 4, let’s first take a look at what changes/improvements it makes to existing APIs.


String is receiving a lot of well deserved love in Swift 4. This proposal contains many changes, so let’s break down the biggest. [SE-0163]:

In case you were feeling nostalgic, strings are once again collections like they were pre Swift 2.0. This change removes the need for a characters array on String. You can now iterate directly over a String object:

let galaxy = "Milky Way 🐮"
for char in galaxy {

Not only do you get logical iteration through String, you also get all the bells and whistles from Sequence and Collection:

galaxy.count       // 11
galaxy.isEmpty     // false
galaxy.dropFirst() // "ilky Way 🐮"
String(galaxy.reversed()) // "🐮 yaW ykliM"

// Filter out any none ASCII characters
galaxy.filter { char in
  let isASCII = char.unicodeScalars.reduce(true, { $0 && $1.isASCII })
  return isASCII
} // "Milky Way "

The ASCII example above demonstrates a small improvement to Character. You can now access the UnicodeScalarView directly from Character. Previously, you needed to instantiate a new String [SE-0178].

Another addition is StringProtocol. It declares most of the functionality previously declared on String. The reason for this change is to improve how slices work. Swift 4 adds the Substring type for referencing a subsequence on String.

Both String and Substring implement StringProtocol giving them almost identical functionality:

// Grab a subsequence of String
let endIndex = galaxy.index(galaxy.startIndex, offsetBy: 3)
var milkSubstring = galaxy[galaxy.startIndex...endIndex]   // "Milk"
type(of: milkSubstring)   // Substring.Type

// Concatenate a String onto a Substring
milkSubstring += "🥛"     // "Milk🥛"

// Create a String from a Substring
let milkString = String(milkSubstring) // "Milk🥛"

Another great improvement is how String interprets grapheme clusters. This resolution comes from the adaptation of Unicode 9. Previously, unicode characters made up of multiple code points resulted in a count greater than 1. A common situation where this happens is an emoji with a selected skin-tone. Here are a few examples showing the before and after behavior:

"👩‍💻".count // Now: 1, Before: 2
"👍🏽".count // Now: 1, Before: 2
"👨‍❤️‍💋‍👨".count // Now: 1, Before, 4

This is only a subset of the changes mentioned in the String Manifesto. You can read all about the original motivations and proposed solutions you’d expect to see in the future.

Dictionary and Set

As far as Collection types go, Set and Dictionary aren’t always the most intuitive. Lucky for us, the Swift team gave them some much needed love with [SE-0165].

Sequence Based Initialization
First on the list is the ability to create a dictionary from a sequence of key-value pairs (tuple):

let nearestStarNames = ["Proxima Centauri", "Alpha Centauri A", "Alpha Centauri B", "Barnard's Star", "Wolf 359"]
let nearestStarDistances = [4.24, 4.37, 4.37, 5.96, 7.78]

// Dictionary from sequence of keys-values
let starDistanceDict = Dictionary(uniqueKeysWithValues: zip(nearestStarNames, nearestStarDistances)) 
// ["Wolf 359": 7.78, "Alpha Centauri B": 4.37, "Proxima Centauri": 4.24, "Alpha Centauri A": 4.37, "Barnard's Star": 5.96]

Duplicate Key Resolution
You can now handle initializing a dictionary with duplicate keys any way you’d like. This helps avoid overwriting key-value pairs without any say in the matter:

// Random vote of people's favorite stars
let favoriteStarVotes = ["Alpha Centauri A", "Wolf 359", "Alpha Centauri A", "Barnard's Star"]

// Merging keys with closure for conflicts
let mergedKeysAndValues = Dictionary(zip(favoriteStarVotes, repeatElement(1, count: favoriteStarVotes.count)), uniquingKeysWith: +) // ["Barnard's Star": 1, "Alpha Centauri A": 2, "Wolf 359": 1]

The code above uses zip along with the shorthand + to resolve duplicate keys by adding the two conflicting values.

Note: If you are not familiar with zip, you can quickly learn about it in Apple’s Swift Documentation

Both Dictionary and Set now have the ability to filter results into a new object of the original type:

// Filtering results into dictionary rather than array of tuples
let closeStars = starDistanceDict.filter { $0.value < 5.0 }
closeStars // Dictionary: ["Proxima Centauri": 4.24, "Alpha Centauri A": 4.37, "Alpha Centauri B": 4.37]

Dictionary Mapping
Dictionary gained a very useful method for directly mapping its values:

// Mapping values directly resulting in a dictionary
let mappedCloseStars = closeStars.mapValues { "\($0)" }
mappedCloseStars // ["Proxima Centauri": "4.24", "Alpha Centauri A": "4.37", "Alpha Centauri B": "4.37"]

Dictionary Default Values
A common practice when accessing a value on Dictionary is to use the nil coalescing operator to give a default value in case the value is nil. In Swift 4, this becomes much cleaner and allows you to do some awesome in line mutation:

// Subscript with a default value
let siriusDistance = mappedCloseStars["Wolf 359", default: "unknown"] // "unknown"

// Subscript with a default value used for mutating
var starWordsCount: [String: Int] = [:]
for starName in nearestStarNames {
  let numWords = starName.split(separator: " ").count
  starWordsCount[starName, default: 0] += numWords // Amazing 
starWordsCount // ["Wolf 359": 2, "Alpha Centauri B": 3, "Proxima Centauri": 2, "Alpha Centauri A": 3, "Barnard's Star": 2]

Previously this type of mutation would need wrapping in a bloated if-let statement. In Swift 4 it’s possible all in a single line!

Dictionary Grouping
Another amazingly useful addition is the ability to initialize a Dictionary from a Sequence and to group them into buckets:

// Grouping sequences by computed key
let starsByFirstLetter = Dictionary(grouping: nearestStarNames) { $0.first! }

// ["B": ["Barnard's Star"], "A": ["Alpha Centauri A", "Alpha Centauri B"], "W": ["Wolf 359"], "P": ["Proxima Centauri"]]

This comes in handy when grouping data by a specific pattern.

Reserving Capacity
Both Sequence and Dictionary now have the ability to explicitly reserve capacity.

// Improved Set/Dictionary capacity reservation
starWordsCount.capacity  // 6
starWordsCount.reserveCapacity(20) // reserves at _least_ 20 elements of capacity
starWordsCount.capacity // 24

Reallocation can be an expensive task on these types. Using reserveCapacity(_:) is an easy way to improve performance when you have an idea how much data it needs to store.

That was a ton of info, so definitely check out both types and look for ways to use these additions to spice up your code.

Private Access Modifier

An element of Swift 3 some haven’t been too fond of was the addition of fileprivate. In theory, it’s great, but in practice its usage can often be confusing. The goal was to use private within the member itself, and to use fileprivate rarely in situations where you wanted to share access across members within the same file.

The issue is that Swift encourages using extensions to break code into logical groups. Extensions are considered outside of the original member declaration scope, which results in the extensive need for fileprivate.

Swift 4 realizes the original intent by sharing the same access control scope between a type and any extension on said type. This only holds true within the same source file [SE-0169]:

struct SpaceCraft {
  private let warpCode: String

  init(warpCode: String) {
    self.warpCode = warpCode

extension SpaceCraft {
  func goToWarpSpeed(warpCode: String) {
    if warpCode == self.warpCode { // Error in Swift 3 unless warpCode is fileprivate
      print("Do it Scotty!")

let enterprise = SpaceCraft(warpCode: "KirkIsCool")
//enterprise.warpCode  // error: 'warpCode' is inaccessible due to 'private' protection level
enterprise.goToWarpSpeed(warpCode: "KirkIsCool") // "Do it Scotty!"

This allows you to use fileprivate for its intended purpose rather than as a bandaid to code organization.

API Additions

Now let’s take a look at the new shinny features of Swift 4. These changes shouldn’t break your existing code as they are simply additive.

Archival and Serialization

Up to this point in Swift, to serialize and archive your custom types you’d have to jump through a number of hoops. For class types you’d need to subclass NSObject and implement the NSCoding protocol.

Value types like struct and enum required a number of hacks like creating a sub object that could extend NSObject and NSCoding.

Swift 4 solves this issue by bringing serialization to all three Swift types [SE-0166]:

struct CuriosityLog: Codable {
  enum Discovery: String, Codable {
    case rock, water, martian

  var sol: Int
  var discoveries: [Discovery]

// Create a log entry for Mars sol 42
let logSol42 = CuriosityLog(sol: 42, discoveries: [.rock, .rock, .rock, .rock])

In this example you can see that the only thing required to make a Swift type Encodable and Decodable is to implement the Codable protocol. If all properties are Codable, the protocol implementation is automatically generated by the compiler.

To actually encode the object, you’ll need to pass it to an encoder. Swift encoders are being actively implemented in Swift 4. Each encodes your objects according to different schemes [SE-0167] (Note: Part of this proposal is still in development):

let jsonEncoder = JSONEncoder() // One currently available encoder

// Encode the data
let jsonData = try jsonEncoder.encode(logSol42)
// Create a String from the data
let jsonString = String(data: jsonData, encoding: .utf8) // "{"sol":42,"discoveries":["rock","rock","rock","rock"]}"

This took an object and automatically encoded it as a JSON object. Make sure to check out the properties JSONEncoder exposes to customize its output.

The last part of the process is to decode the data back into a concrete object:

let jsonDecoder = JSONDecoder() // Pair decoder to JSONEncoder

// Attempt to decode the data to a CuriosityLog object
let decodedLog = try jsonDecoder.decode(CuriosityLog.self, from: jsonData)
decodedLog.sol         // 42
decodedLog.discoveries // [rock, rock, rock, rock]

With Swift 4 encoding/decoding you get the type safety expected in Swift without relying on the overhead and limitations of @objc protocols.

Key-Value Coding

Up to this point you could hold reference to functions without invoking them because functions are closures in Swift. What you couldn’t do is hold reference to properties without actually accessing the underlying data held by the property.

A very exciting addition to Swift 4 is the ability to reference key paths on types to get/set the underlying value of an instance [SE-0161]:

struct Lightsaber {
  enum Color {
    case blue, green, red
  let color: Color

class ForceUser {
  var name: String
  var lightsaber: Lightsaber
  var master: ForceUser?

  init(name: String, lightsaber: Lightsaber, master: ForceUser? = nil) {
    self.name = name
    self.lightsaber = lightsaber
    self.master = master

let sidious = ForceUser(name: "Darth Sidious", lightsaber: Lightsaber(color: .red))
let obiwan = ForceUser(name: "Obi-Wan Kenobi", lightsaber: Lightsaber(color: .blue))
let anakin = ForceUser(name: "Anakin Skywalker", lightsaber: Lightsaber(color: .blue), master: obiwan)

Here you’re creating a few instances of force users by setting their name, lightsaber, and master. To create a key path, you simply use a back-slash followed by the property you’re interested in:

// Create reference to the ForceUser.name key path
let nameKeyPath = \ForceUser.name

// Access the value from key path on instance
let obiwanName = obiwan[keyPath: nameKeyPath]  // "Obi-Wan Kenobi"

In this instance, you’re creating a key path for the name property of ForceUser. You then use this key path by passing it to the new subscript keyPath. This subscript is now available on every type by default.

Here are more examples of ways to use key paths to drill down to sub objects, set properties, and build off key path references:

// Use keypath directly inline and to drill down to sub objects
let anakinSaberColor = anakin[keyPath: \ForceUser.lightsaber.color]  // blue

// Access a property on the object returned by key path
let masterKeyPath = \ForceUser.master
let anakinMasterName = anakin[keyPath: masterKeyPath]?.name  // "Obi-Wan Kenobi"

// Change Anakin to the dark side using key path as a setter
anakin[keyPath: masterKeyPath] = sidious
anakin.master?.name // Darth Sidious

// Note: not currently working, but works in some situations
// Append a key path to an existing path
//let masterNameKeyPath = masterKeyPath.appending(path: \ForceUser.name)
//anakin[keyPath: masterKeyPath] // "Darth Sidious"

The beauty of key paths in Swift is that they are strongly typed! No more of that Objective-C string style mess!

Multi-line String Literals

A very common feature to many programming languages is the ability to create a multi-line string literal. Swift 4 adds this simple but useful syntax by wrapping text within three quotes [SE-0168]:

let star = "⭐️"
let introString = """
  A long time ago in a galaxy far,
  far away....

  You could write multi-lined strings
  without "escaping" single quotes.

  The indentation of the closing quotes
       below deside where the text line

  You can even dynamically add values
  from properties: \(star)
print(introString) // prints the string exactly as written above with the value of star

This is extremely useful when building XML/JSON messages or when building long formatted text to display in your UI.

One-Sided Ranges

To reduce verbosity and improve readability, the standard library can now infer start and end indices using one-sided ranges [SE-0172].

One way this comes in handy is creating a range from an index to the start or end index of a collection:

// Collection Subscript
var planets = ["Mercury", "Venus", "Earth", "Mars", "Jupiter", "Saturn", "Uranus", "Neptune"]
let outsideAsteroidBelt = planets[4...] // Before: planets[4..<planets.endIndex]
let firstThree = planets[..<4]          // Before: planets[planets.startIndex..<4]

As you can see, one-sided ranges reduce the need to explicitly specify either the start or end index.

Infinite Sequence
They also allow you to define an infinite Sequence when the start index is a countable type:

// Infinite range: 1...infinity
var numberedPlanets = Array(zip(1..., planets))
print(numberedPlanets) // [(1, "Mercury"), (2, "Venus"), ..., (8, "Neptune")]

numberedPlanets = Array(zip(1..., planets))
print(numberedPlanets) // [(1, "Mercury"), (2, "Venus"), ..., (9, "Pluto")]

Pattern Matching
Another great use for one-sided ranges is pattern matching:

// Pattern matching

func temperature(planetNumber: Int) {
  switch planetNumber {
  case ...2: // anything less than or equal to 2
    print("Too hot")
  case 4...: // anything greater than or equal to 4
    print("Too cold")
    print("Justtttt right")

temperature(planetNumber: 3) // Earth

Generic Subscripts

Subscripts are an important part of making data types accessible in an intuative way. To improve their usefulness, subscripts can now be generic [SE-0148]:

struct GenericDictionary<Key: Hashable, Value> {
  private var data: [Key: Value]

  init(data: [Key: Value]) {
    self.data = data

  subscript<T>(key: Key) -> T? {
    return data[key] as? T

In this example, the return type is generic. You can then use this generic subscript like so:

// Dictionary of type: [String: Any]
var earthData = GenericDictionary(data: ["name": "Earth", "population": 7500000000, "moons": 1])

// Automatically infers return type without "as? String"
let name: String? = earthData["name"]

// Automatically infers return type without "as? Int"
let population: Int? = earthData["population"]

Not only can the return type be generic, but the actual subscript type can be generic as well:

extension GenericDictionary {
  subscript<Keys: Sequence>(keys: Keys) -> [Value] where Keys.Iterator.Element == Key {
    var values: [Value] = []
    for key in keys {
      if let value = data[key] {
    return values

// Array subscript value
let nameAndMoons = earthData[["moons", "name"]]        // [1, "Earth"]
// Set subscript value
let nameAndMoons2 = earthData[Set(["moons", "name"])]  // [1, "Earth"]

In this example, you can see that passing in two different Sequence type (Array and Set) results in an array of their respective values.


That handles the biggest changes in Swift 4. Now let’s go a little more rapidly through some of the smaller bits and pieces.


MutableCollection now has the mutating method swapAt(_:_:) which does just as it sounds; swap the values at the given indices [SE-0173]:

// Very basic bubble sort with an in-place swap
func bubbleSort<T: Comparable>(_ array: [T]) -> [T] {
  var sortedArray = array
  for i in 0..<sortedArray.count - 1 {
    for j in 1..<sortedArray.count {
      if sortedArray[j-1] > sortedArray[j] {
        sortedArray.swapAt(j-1, j) // New MutableCollection method
  return sortedArray

bubbleSort([4, 3, 2, 1, 0]) // [0, 1, 2, 3, 4]

Associated Type Constraints

You can now constrain associated types using the where clause [SE-0142]:

protocol MyProtocol {
  associatedtype Element
  associatedtype SubSequence : Sequence where SubSequence.Iterator.Element == Iterator.Element

Using protocol constraints, many associatedtype declarations could constrain their values directly without having to jump through hoops.

Class and Protocol Existential

A feature that has finally made it to Swift from Objective-C is the ability to define a type that conforms to a class as well as a set of protocols [SE-0156]:

protocol MyProtocol { }
class View { }
class ViewSubclass: View, MyProtocol { }

class MyClass {
  var delegate: (View & MyProtocol)?

let myClass = MyClass()
//myClass.delegate = View() // error: cannot assign value of type 'View' to type '(View & MyProtocol)?'
myClass.delegate = ViewSubclass()

Limiting @objc Inference

To expose or your Swift API to Objective-C, you use the @objc compiler attribute. In many cases the Swift compiler inferred this for you. The three main issues with mass inference are:

    1. Potential for a significant increase to your binary size
    2. Knowing when @objc will

be inferred isn’t obvious

  1. The increased chance of inadvertently creating an Objective-C selector collisions.

Swift 4 takes a stab at solving this by limiting the inference of @objc [SE-0160]. This means that you’ll need to use @objc explicitly in situations where you want the full dynamic dispatch capabilities of Objective-C.

A few examples of where you’ll need to make these changes include private methods, dynamic declarations, and any methods of NSObject subclasses.

NSNumber Bridging

There have been many funky behaviors between NSNumber and Swift numbers that have been haunting the language for too long. Lucky for us, Swift 4 squashes those bugs [SE-0170].

Here’s an example demonstrating an example of the behavior:

let n = NSNumber(value: 999)
let v = n as? UInt8 // Swift 4: nil, Swift 3: 231

The weird behavior in Swift 3 shows that if the number overflows, it simply starts over from 0. In this example, 999 % 2^8 = 231.

Swift 4 solves the issue by forcing optional casting to return a value only if the number can be safely expressed within the containing type.

What’s New in Swift 4

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s